Light Commercial Multi System Mid Static Duct Air Conditioner

The micro-processor automatically adjusts the air flow to follow changes in room temperature.

The room temperature can be set to go no lower than 10°C, thus ensuring that the room does not get too cold when not occupied.

The unit automatically switches between operating modes based on the temperature setting and room temperature.

Allows introduction of fresh air to the occupied space.

Should there be a temporary loss of power, the unit will automatically restart itself in the same operating mode, once the power is restored.

The micro-processor gradually changes the room temperature, allowing you to sleep comfortably at night.

This timer allows selection of one of four options. ON, OFF, ON ––> OFF, or OFF ––> ON.

Different ON-OFF times can be set for up to 7 days.

Weekly + setback timer can set temperature for two time spans and for each day of the week.

Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated amount of dust in the air of the room.

ON-OFF timer can be set to operate once every 24 hours.

The indoor units fan can operate at a low speed to produce quieter operation.

v-PAM inverter technology increases the maximum output of the compressor significantly and enables high power and high efficiency.

i-PAM inverter technology enables high output and high efficiency performance.

This product is designed to be compatible with Air Conditioning Demand Response program. When your electricity supplier activates one of the three modes the air conditioner switches over to the appropriate operation.

Limits the maximum operation current, and performs operation with the power consumption suppressed.